Fibaro Flood Sensor is a universal, Z-Wave Plus compatible, flood and temperature sensor. Device can be battery or VDC powered (12 or 24 VDC). Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact. The device has built in temperature sensor, monitoring temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensors probe extended by connected wire. The device has built in LED and sound alarm. In addtion, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when the Sensor has been taken by someone from it’s original location. LED diode signals flood, opera- ting mode or the Z-Wave network communication range. Fibaro Flood Sensor is sink-resistant, drifts on the water sufrace and keeps on sending alarm signal in case of substantial inundation.